Some storms come during certain times of the year that can interrupt the power supply to communities over large geographical areas. The utility companies servicing these area have crews that will go out into the storm and try to reconnect the power so people can stay comfortably in their homes and not wander out into an ice storm or hurricane. There are some linesman tools that are specially made to help the workers get to where the downed wires are located and help them reconnect the wires back to the poles and restore the electricity to a community.
An essential piece of equipment in that linesmen depend on is the utility trucks they use. These are large trucks that can fill up a roadway and make them hard to pass on narrow roads. The extra large vehicles often weigh nearly five tons and carry just about anything linesmen will need to perform their job when they are out on the road. Several big compartments are located throughout the vehicle to store all the supplies and tools they would commonly need for a repair job.
The utility trucks come with lift buckets to get the personnel into places where a ladder would prove to be too dangerous to use. The bucket can move up and down and left and right. They have a boom arm that can extend out and get personnel over a mess that could be lying on the ground.
Trees that have fallen and are resting on other trees, wires and poles can be very dangerous to be around. The trees grow even more dangerous when one starts to cut limbs and the trunk to get them away from the wires and poles. A tree can suddenly shift and drop to the ground. Cutting the tree from above while in a bucket can help get workers safe.
Chainsaws are a normal part of the equipment a linesman will use after a big storm. They have to remove trees that are lying on the wires off of them before they can repair the lines and restore the electrical flow. The chainsaws allow them to cut branches and trunks so the tree lays flat on the ground and will not be a danger.
Another measure to ensure the safety of workers in the buckets is to wear a safety harness. These harnesses are strapped around the body and then connected to the rails of the bucket. If a worker over reaches and falls out of the bucket, the harness will keep them from crashing to the ground and possibly get seriously hurt. Safety helmets are also worn by all workers in case items drop on their heads.
Linesmen often wear heavy leather belts to store their hand tools in. When a utility employee works on connecting wire back onto a pole they often use screwdrivers, utility knives and wire crimping devices. These are easily stored in the pockets on a utility belt and are always in reach when an employee needs to use them.
A lot of wire can get knocked down in a bad storm when trees tip over. A utility company will send workers to a site with their linesman tools to fix the problem. The equipment is designed to help them get the power back on as quickly as possible.
An essential piece of equipment in that linesmen depend on is the utility trucks they use. These are large trucks that can fill up a roadway and make them hard to pass on narrow roads. The extra large vehicles often weigh nearly five tons and carry just about anything linesmen will need to perform their job when they are out on the road. Several big compartments are located throughout the vehicle to store all the supplies and tools they would commonly need for a repair job.
The utility trucks come with lift buckets to get the personnel into places where a ladder would prove to be too dangerous to use. The bucket can move up and down and left and right. They have a boom arm that can extend out and get personnel over a mess that could be lying on the ground.
Trees that have fallen and are resting on other trees, wires and poles can be very dangerous to be around. The trees grow even more dangerous when one starts to cut limbs and the trunk to get them away from the wires and poles. A tree can suddenly shift and drop to the ground. Cutting the tree from above while in a bucket can help get workers safe.
Chainsaws are a normal part of the equipment a linesman will use after a big storm. They have to remove trees that are lying on the wires off of them before they can repair the lines and restore the electrical flow. The chainsaws allow them to cut branches and trunks so the tree lays flat on the ground and will not be a danger.
Another measure to ensure the safety of workers in the buckets is to wear a safety harness. These harnesses are strapped around the body and then connected to the rails of the bucket. If a worker over reaches and falls out of the bucket, the harness will keep them from crashing to the ground and possibly get seriously hurt. Safety helmets are also worn by all workers in case items drop on their heads.
Linesmen often wear heavy leather belts to store their hand tools in. When a utility employee works on connecting wire back onto a pole they often use screwdrivers, utility knives and wire crimping devices. These are easily stored in the pockets on a utility belt and are always in reach when an employee needs to use them.
A lot of wire can get knocked down in a bad storm when trees tip over. A utility company will send workers to a site with their linesman tools to fix the problem. The equipment is designed to help them get the power back on as quickly as possible.
About the Author:
You can visit the website www.zanthotools.com for more helpful information about Linesman Tools That Are Used To Restore Power
